| Casing - |
Use one fastener every 8 - 12” alternating between the heel and nose of the profile. At miters, put one fastener in the heel and toe to hold it securely in place. |
 |
| Base - |
Use one fastener every 8 - 12” alternating between the top and bottom of the profile and ensuring that it is driven into the bottom of the bottom plate or stud. |
| Crown - |
Use one fastener every 8 - 12” ensuring that it drives into the top plate and that it penetrates far enough to provide good holding strength. |
|
Apply moulding to wall using appropriate sized finishing nails. |